Dynasty Trade CalculatorCheck a trade

Free tool for 1QB leagues

1QB Dynasty Trade Calculator

Grade any 1QB trade in seconds. Quarterbacks priced for one starter.

Editorial value board. Our editors set these values from public reporting. They are estimates, not transaction data. Updated 17 November 2026.

Step 1: Choose your league format

Format
Scoring
TE premium

Step 2: Add players and picks

Side A

    Raw total: 0

    Adjusted: 0

    Side B

      Raw total: 0

      Adjusted: 0

      Add players or picks to both sides

      The verdict appears once each side has at least one piece.

      12-team league. See the full method.

      A 1QB dynasty trade calculator grades a trade with one starting quarterback in mind. Only one quarterback starts, so most quarterbacks cost far less than in Superflex. Running backs, wide receivers, and picks drive the totals instead. Add both sides below to see raw totals, adjusted totals, and the gap.

      Three steps

      How do you grade a 1QB trade on this page?

      Set the format first, then build the trade. Tap 1QB in the format row so every quarterback prices on the 1QB scale. Add players and picks to each side, and the totals update as you add. The verdict reads the adjusted gap, so a pile of depth cannot outscore one elite starter.

      1. 1

        Set the format to 1QB

        Tap the 1QB chip in the format row before you add anyone. Superflex is the wrong scale here: it prices quarterbacks as if two start. One tap sets the whole trade right. Check the chip again if you open a shared link, since a link can carry Superflex settings.

      2. 2

        Build around running backs and receivers

        Search and add the skill players and picks on each side. In 1QB, elite running backs and wide receivers lead the totals, and picks hold their price as trade currency. Add a quarterback last, and only if the deal moves one.

      3. 3

        Read the gap and test the add

        Check the adjusted totals and the gap percent. Fair means 5 percent or less. If the gap runs past 5 percent, try the even-trade suggestions: add one piece to the losing side and watch the gap move. If no single add closes it, the deal needs a bigger rethink.

      Why the format matters

      Why do quarterbacks cost less in 1QB leagues?

      Only 12 quarterbacks start each week in a 12-team 1QB league, and 32 NFL teams field a starter. Supply beats demand, so the 13th quarterback costs little even when he plays well. Only elite rushers who outscore the field keep top prices. Everyone else slides down the board.

      KeepTradeCut keeps two separate value databases for Superflex and 1QB, according to its FAQ as observed on 15 November 2026. The split matters most at quarterback. The Smash Accept values guide, RotoBaller, and FF Trading Room, all read on 15 November 2026, describe 1QB the same way: only top rushing quarterbacks hold elite value, and the rest slide several rounds. In 1QB, the 13th quarterback is a backup. In Superflex, he is a starter. Check the quarterback values to see the 1QB scale beside the Superflex scale.

      That slide changes how you trade. Selling a mid-tier quarterback for a first round pick rarely works in 1QB, because every team already has a starter and the waiver wire holds a backup. Buying works the other way: a contender can add a second quarterback cheaply as injury cover, but should not pay starter prices for cover. Price the quarterback on the 1QB scale, then ask what the roster gains.

      Picks and skill players carry 1QB trades. An early first round pick keeps its price in any format, since it can become a running back or receiver who starts for years. The calculator prices picks by slot and year, with current-year exact slots and future Early, Mid, and Late ranges. The band does not move with format: 5 percent or less is fair. If your league adds a Superflex spot, the Superflex calculator prices the same trade with two starters.

      Worked examples

      What does a fair 1QB trade look like?

      Fair means an adjusted gap of 5 percent or less, the same band as every format. The first trade below uses example values with 1QB, half PPR, and TE premium off, and its running back math matches the homepage example. The second trade shows a 1QB pattern in words, with no new numbers.

      Example 1: one running back for one running back

      Side A gives Bijan Robinson at an example value of 9,500. Side B gives Jahmyr Gibbs at 9,200. Running back values do not move with format, so these totals match the Superflex example. Each side holds one piece, so raw and adjusted totals match. The gap is 300 on 9,500, which is 3.2 percent. Fair.

      Editorial value board. Our editors set these values from public reporting. They are estimates, not transaction data. Updated 17 November 2026.

      Example 1 totals for Bijan Robinson and Jahmyr Gibbs
      SideRawAdjusted
      Side A: Bijan Robinson9,5009,500
      Side B: Jahmyr Gibbs9,2009,200

      Verdict: Fair trade. Gap: 3.2%

      Example 2: a quarterback plus a pick for a star receiver

      Picture a 1QB offer: a mid-tier quarterback and a future second round pick for a top wide receiver. On 1QB values, the quarterback adds little, since a replacement sits on waivers. The pick carries most of the weight on that side, and the stud weights cut the second piece further. The deal reads lopsided unless the pick is early or a stronger piece joins. That pattern is the 1QB lesson: pay for starters, not for names at quarterback.

      This example uses words only. No values are priced here.

      Try the first trade with the quick-try button in the calculator above. The button loads Superflex settings, so tap 1QB after it loads to see the same running back totals on the 1QB scale.

      Before you accept

      What do 1QB managers ask before they accept a trade?

      1QB questions center on quarterbacks and picks: when a quarterback is worth paying for, when he is not, and what a pick should fetch. The answers below cover the price gap, the fair band, quarterback trades, and pick value. Use them as a quick check before you accept.

      Why does the same quarterback cost less in 1QB than in Superflex?

      Only one quarterback starts in 1QB, so 12 starters fill a 12-team league and the rest wait on benches or waivers. In Superflex, a second quarterback starts, so twice as many hold starting jobs. Scarcity sets the price. This calculator keeps a separate 1QB value for each quarterback, so the format chip decides what he costs.

      Is it ever right to pay a first round pick for a quarterback in 1QB?

      Only for an elite rusher who outscores the field by a wide margin, and only when your roster lacks a starter. A mid-tier quarterback rarely earns a first, since a free backup scores close enough most weeks. Check the gap on this page first. If the quarterback side trails by more than 15 percent, the price is too high.

      How do you grade a trade as fair in 1QB?

      The same way as every format on this site. Add both sides twice: raw totals use simple addition, and adjusted totals give full weight to the best piece, then 75, 55, 40, and 30 percent to the next pieces. If the adjusted gap is 5 percent or less, the trade counts as fair. Format changes the values, not the band.

      What should you do with extra quarterbacks in a 1QB league?

      Hold one starter and one backup, and trade the rest while they hold value. Extra quarterbacks lose value fast in 1QB, since no team needs a third starter. Package one with a pick for a running back or receiver who starts each week. If no leaguemate pays, keep the backup and spend the roster spot on a skill player instead.

      Keep reading

      Where can you check the numbers behind a 1QB verdict?

      A verdict means little without the numbers behind it. The chart, the pick ladder, and the method page below show what the calculator used. The guides add the format gap, the fair window, and the contender view. Open them when a verdict surprises you.

      Methodology

      The same method grades every format. Read the weights, the band, and the pick rule.