Dynasty Trade CalculatorCheck a trade

Guide

PPR vs Half PPR Dynasty Scoring, Explained

By Dynasty Trade Calculator editorial team · Published 15 November 2026

PPR, half PPR, and standard scoring pay different rates for each reception. Full PPR pays 1 point per catch. Half PPR pays 0.5 points. Standard pays 0 points, so only yards and touchdowns count. Pass catchers gain the most in full PPR. Yardage-first players gain the most in standard. Half PPR sits between the two.

Key takeaways

  • Full PPR pays 1 point per catch, half PPR pays 0.5, and standard pays 0.
  • On this site, half PPR is the base. Full PPR lifts WR and TE by x1.05 and RB by x1.03.
  • Standard drops WR and TE by x0.95 and RB by x0.97. Quarterback values do not move with scoring.
  • KeepTradeCut uses half PPR as its base. Always state the scoring before you compare two boards.

How does scoring change dynasty trade values?

Scoring changes values because it changes what a catch is worth. A receiver who catches 8 passes earns 8 extra points in full PPR, 4 in half PPR, and 0 in standard. That weekly gap moves trade prices: pass catchers cost more in full PPR and less in standard. The player stays the same. The scoring changes the price.

Full PPR pays 1 point per reception and lifts pass catchers: receivers, receiving running backs, and tight ends. Standard scoring favors yardage and touchdowns, since catches earn nothing. Half PPR is the middle ground, and it is also the base scoring KeepTradeCut uses, with a 12-team league as its base format. Those definitions were observed on 15 November 2026. A board that never states its scoring asks you to guess.

This site starts from half PPR, the same base KeepTradeCut uses. The calculator prints the scoring rule beside each verdict, so the setting is never hidden. Grade every trade under your league scoring. A full PPR value used in a standard league overpays for every pass catcher in the deal, and the error grows with each catch the player makes.

What is the difference between PPR, half PPR, and standard?

The difference is the points per reception. Full PPR pays 1 point for each catch, for every position. Half PPR pays 0.5 points per catch. Standard pays 0 points per catch, so a reception earns nothing on its own. Yards and touchdowns score the same in all three. Only the catch rate changes, and only pass catchers feel it.

The table lists the catch rate and the site factor for each setting. Factors apply to the half PPR base value. Quarterbacks do not move with scoring on this site, since quarterback scoring does not depend on receptions.

Scoring rates and site factors by setting
ScoringPoints per catchWR and TE factorRB factor
Full PPR1x1.05x1.03
Half PPR0.5x1.00x1.00
Standard0x0.95x0.97

Some boards publish one scoring only, and say so. DynastyFootballTradeCalculator builds its board on full PPR and discloses that limit, as observed on 15 November 2026. That disclosure is honest, but it means the board fits full PPR leagues only. This site prices all three settings, so one board serves each league. Check the disclosure before you trust any board in a different scoring format.

Which players gain the most in full PPR?

Pass catchers gain the most in full PPR. Slot receivers, receiving running backs, and pass-catching tight ends earn points on volume, catch after catch. A running back who catches 5 passes a game gains 5 points in full PPR and 0 in standard. Deep threats and goal-line runners gain the least, since their value comes from yards and touchdowns.

The site factors show the same order. Full PPR lifts receivers and tight ends by x1.05 and running backs by x1.03, from the half PPR base. Standard drops receivers and tight ends to x0.95 and running backs to x0.97. The lift is small on purpose: scoring moves pass catchers, but age and role still decide most of the value. Check the receiver and running back value pages to see the board under each setting.

Tight ends feel scoring twice when TE premium is also on. The scoring factor moves first, then the premium factor applies to the result. A tight end in full PPR with +1.0 premium gains from both rules at once. The TE premium guide explains the premium side, and the tight end values page shows the combined board. Set scoring before premium, and read the combined factor in the calculator note.

PPR pays for catches. Standard pays for yards. Know which one your league pays for before you pay for a player.

What does a scoring change do to one trade?

Take a trade that swaps a reception-heavy running back for a yardage-first running back. In full PPR, the reception-heavy back wins, since each catch adds a point. In standard, the yardage-first back wins, since catches earn nothing and yards decide the week. In half PPR, the gap narrows. Same names, same league. Scoring flips the verdict.

Grade the same trade three times on the calculator: full PPR, half PPR, and standard. The receiver and running back totals will move with each setting, while quarterback totals stay put. The site factors are small, so the verdict may not flip on every trade. When it does flip, scoring decided the deal, and the trade needs a second look under your league setting only.

Picks do not move with scoring on this site. A rookie pick holds the same value in full PPR, half PPR, and standard, since the pick prices a future player, not a scoring rule. The pick values page lists the ladder for all settings. In a trade that mixes players and picks, only the player side moves when scoring changes. That split is easy to miss, and it changes package deals most.

Should you check a trade under more than one scoring setting?

Check your league setting first, and treat other settings as a second opinion only. Your league setting decides the verdict that matters. A second check under full PPR or standard shows how sensitive the trade is to scoring. If the verdict holds across all three settings, the trade is sturdy. If it flips, the scoring setting owns the call.

In our view, one check is enough for most trades, when the setting is right. Three checks earn their keep on close trades, where the gap sits near the 5 percent line and a small factor swing can flip the label. The methodology page states the scoring factors in full, so you can run the second check by hand. Trust the check that matches your league. The rest is context.

Tools that hide their base scoring cause the worst confusion. KeepTradeCut states half PPR as its base, which lets you adjust. A tool with no stated base forces a guess. The comparison page lists what each leading tool assumes, where that fact could be verified. If a board never states its scoring, grade with care, and cross-check on a board that does.

A trade that only wins under the wrong scoring does not win. It borrows a verdict from another league.

What mistakes do managers make with scoring settings?

The first mistake is to grade a standard trade on a full PPR board, which overpays for pass catchers. The second is to forget quarterbacks do not move: a scoring change never fixes a quarterback gap. The third is to mix settings in one trade, pricing one side in PPR and the other in standard. One trade, one setting.

Scoring mistakes often pair with format mistakes. A trade graded in the wrong format and the wrong scoring carries two errors at once, and the verdict means nothing. Set format first, then scoring, then TE premium. The format guide and the TE premium guide cover the other two settings, and the calculator prints all three rules beside each verdict. Read the note before you trust the verdict.

A board with no stated base is the last trap. If you cannot find the scoring line on a chart, assume nothing. The value chart on this site states the base on the page, and the scoring toggle sits above the table. A chart that hides its scoring hides its method, and a hidden method earns no trust. State the setting, or skip the board.

Scoring is a setting, not a preference. Your league picked it. Your calculator should match it.

What else should you ask about PPR and scoring?

These answers cover half PPR, quarterbacks, the best setting, and rookie picks. Each answer uses the same base as the guide: half PPR, with full PPR and standard as factors. Open the calculator, set your league scoring, and grade the trade that brought you here.

What is half PPR in dynasty?

Half PPR pays 0.5 points per reception, halfway between full PPR at 1 point and standard at 0 points. It rewards pass catchers without letting catches dominate scoring. KeepTradeCut uses half PPR as its base scoring. This site also starts from half PPR, and prices full PPR and standard as factors from that base.

Does scoring change quarterback values?

No, not on this site. Quarterback values do not move with scoring, since quarterback scoring does not depend on receptions. Format moves quarterbacks: Superflex and 1QB carry separate quarterback values. Scoring moves pass catchers: receivers, running backs, and tight ends. If a scoring change seems to fix a quarterback gap, the format setting is wrong, not the scoring.

Which scoring setting is best for dynasty?

That choice belongs to the league. Full PPR rewards pass catchers and spreads value across more positions. Standard rewards yardage and touchdowns, and keeps scoring closer to on-field production. Half PPR splits the difference, which is why KeepTradeCut uses it as the base. Pick the setting your league enjoys, then grade every trade on that setting.

Do rookie picks change value with scoring?

No, not on this site. A rookie pick holds the same value in full PPR, half PPR, and standard, since the pick prices a future player, not a scoring rule. Scoring moves the players in a trade, not the picks. Price the pick from the ladder, and the players from your scoring.

What should you read next?

Three guides finish the settings set. The TE premium guide shows the bonus that builds on PPR. The format guide shows why quarterbacks swing between Superflex and 1QB. The values guide explains where each number comes from. Set scoring first, then read the setting that shapes your next trade.